Question: How much oil does it take to deep fry a turkey?

Fill the pot with peanut or canola oil up to the mark you made earlier—you’ll need 4 to 5 gallons to fry a 12- to 14-pound turkey in a 30-quart pot. Turn the burner on, adjust the heat to moderately high, and heat the oil until the thermometer registers 375°F.

How much oil do I need for a 24 pound turkey?

The 30-quart Bijou Classic is good for turkeys up to 14 pounds. The 32-quart pot is good for turkeys up to 24 pounds.

Does it Take to deep fry a 15lb turkey?

Once the temperature of the oil has reached 350°F (180°C), slowly and gently lower the turkey into the oil. SLOWLY AND GENTLY. Fry the turkey for 3 minutes per pound (455 grams). For a 15 lb (6.8 kg) turkey, this will take 45 minutes.

What oil to use to deep fry a turkey?

Peanut oil is the best oil for deep frying turkey because its high flash point makes it less likely to catch on fire. The best oil for fried turkey should also be low in saturated fat because the turkey will absorb a small amount of oil as it cooks.

THIS IS IMPORTANT:  How long should I cook my pizza?

How many quarts do you need to fry a turkey?

Here’s how to choose the right size pot: 26-quart: for frying a 12- to 14-pound turkey. 34-quart: for frying a 14- to 20-pound turkey. 40-quart: for turkeys larger than 20 pounds.

How much oil do I need to deep-fry a 12 pound turkey?

Place the pot on the burner and clip the deep-fry thermometer to the side of the pot. Fill the pot with peanut or canola oil up to the mark you made earlier—you’ll need 4 to 5 gallons to fry a 12- to 14-pound turkey in a 30-quart pot.

How long does it take to deep-fry a whole turkey?

Place the turkey into a drain basket, neck-side first. Working slowly and carefully, gently lower the basket into the hot oil to completely cover the turkey. Maintain the temperature of the oil at 350 degrees F (175 degrees C), and cook turkey for 3 1/2 minutes per pound, about 35 minutes.

How much oil do you put in a deep fryer?

Step 1: Pour in oil up to maximum fill line

Most electric deep-fryers use between 6 and 19 cups of oil; our winner uses slightly under 15 cups. This is more than enough oil for most of our recipes; when deep-frying in a Dutch oven, we typically use 8 to 12 cups.

Can I use peanut oil for deep-frying?

Peanut oil, also known as groundnut oil, has a high smoke point of about 446°F (230°C). It’s popular for deep frying because it has a neutral taste ( 11 ).

How do you deep fry a turkey in canola oil?

Deep Frying Tips:

  1. Preheat oil to 375°F (190°C). …
  2. Using oven mitts and a turkey basket or holder, CAREFULLY lower the turkey into the oil. …
  3. Estimate 3 minutes per pound – a 10 lb turkey takes approximately 30 minutes to deep-fry.
THIS IS IMPORTANT:  Frequent question: How long do you cook top sirloin?

How many times can you use peanut oil after frying a turkey?

Shelf life

Peanut oil can usually be used three or four times to fry turkeys before it shows signs of going bad, according to the Texas Peanut Producers Board via The National Turkey Federation.

Can you leave oil in deep fryer?

Can I Leave Oil in My Deep Fryer? While it is best to store oil outside of your fryer when it is not in use for long periods of time, you can leave oil in your deep fryer for short periods. That being said, it is important to first filter the oil to ensure that any food debris does not spoil while in the fryer.

Can you reuse peanut oil after deep frying?

Generally speaking, reusing the peanut oil is fine. … First, remove any food particles from the oil after frying. Second, frying causes the quality of oil to deteriorate, so after a few uses, the oil won’t be as good as it was to begin with. Third, oil tends to take some of the flavors of food fried in it.